Horizontal Split Case Pump
DESCRIPTION
- Standardized design with reliable performance
- The cast iron casing is axially split which permits removal of the complete rotor without moving either piping or motor. Pumps generating high heads have double volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads.
- The bronze closed type impellers have double curved vanes. The double suction design gives practically zero axial forces. Each impeller is statically and dynamically balanced.
- The carbon steel shaft is fully sealed against the liquid being pumped. Shaft protecting sleeves are fitted in the seal area.
- Replaceable cast iron rings protect the casing at the impeller running clearances.
- Stuffing box is fitted with mechanical seal. Pump can be supplied with gland packing also.
- Bearings are grease lubricated deep groove ball type.
Standard Material
Casing | Cast Iron |
---|---|
Shaft | Carbon Steel |
Impeller | Bronze |
Wear Ring | Cast Iron |
Follow Us On Our Social Media.
Categories Custom Designed Fire Pumps, Fire Pumps & Controllers
PUMP SELECTION CUREVES
Head Office
Bizpark3 Commercial Estate Jl. Sultan Agung Km. 28, 5 Blok C. No. 32 Medan Satria Bekasi 17133
- 021 8849999 ( Hunting )
- sales@fatiha.co.id
Representative Office
Perumahan Gading Fajar I Blok B No. 33 Siwalanpanji, Kec. Buduran, Kabupaten Sidoarjo, Jawa Timur 61252, Indonesia
Phoenix Residence Blok Blok G No. 2, Mandalika, Kec. Sandubaya, Kota Mataram, Nusa Tenggara Bar. 83233
mataram@fatiha.co.id
Jalan Datuk Kabu Pasar Tiga No.70 Tembung Kel. Tembung Kec. Percut Sei Tuan Deli Serdang, Sumatra Utara. 20371 Telephone: 061 73385469