Description
Addressable Single Action and Dual Action Pull Stations
The TR-PULL-SA is a single action pull station requiring only one motion to activate the station. The TR-PULL-DA is a dual action pull station requiring two motions to active the station. Both pull stations are designed to work with Triga series fire alarm control panels (FACPs).
INSTALLATION
The TR-PULL-SA and TR-PULL-DA can be surface mounted to an SB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13”(5.40 cm) or double gang or 4” (10.61 cm) square electrical box. You can also use the optional trim ring if the station is being semi-flush mounted.
COMPATIBILITY
The TR-PULL-SA and TR-PULL-DA are compatible with the following
Triga Series FACPs:
• TR-2100R / TR-2100B
• TR-2100ECSR / TR-2100ECSB
• TR-R2100R / TR-R2100B
Features & Benefits
• Installer can open station without causing an alarm condition
• Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition
• Key operated test and reset lock using lock plate actuator
• Key matches compatible FACP locks
• Meets ADA requirement for 5 lbs maximum pull force to active
• Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13])
• Shell, door, and handle molded from durable LEXAN ®
• Reliable analog communications for trouble-free operation
• Braille text on station handle
• Rotary address switches for fast installation
• Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled
• UL Listed, including UL 38, Standard of Manually Actuated Signaling System
Technical Specifications
SPECIFICATIONS*
Physical: 5.5″ H x 4″ D (14cm x 10.2cm) Shipping Weight: 5.4oz
Housing Material: LEXAN polycarbonate resin Bi-Colored LED:
Blinking Green: Normal
Steady Red: Alarm
Switch: Single pole, single throw (SPST) normally open (N/O) switch which closes upon activation of the pull station.
ELECTRICAL RATINGS
Operating Voltage: 15 – 32VDC
SLC Standby and Alarm Current: 350μA
Wire Gauge: Up to 12AWG (3.1 mm2)
ENVIRONMENTAL
Operating Temperature: 32º-120ºF (0ºC – 49ºC)
Humidity: 10 to 93% non-condensing)
ORDERING INFORMATION
TR-Pull-SA: Single Action Pull Station
TR-Pull-DA: Dual Action Pull Station
ACCESSORIES
BG-TR: Optional trim ring.
SB-I/O: Surface backbox, indoor/outdoor.
*Unless otherwise noted, specifications apply to TR-Pull-SA and TR-Pull-DA
